BLGVT - S-100 SILICONE MOLD RELEASE, 50 1001
- MSDS: BLGVT
- Manufacturer: ZIP CHEM PRODUCTS
- Product Name: S-100 SILICONE MOLD RELEASE, 50 1001
- National Stock Number: 8030-00N019604
Product Identification
Product ID:S-100 SILICONE MOLD RELEASE, 50 1001
MSDS Date:11/30/1989
FSC:8030
NIIN:00N019604
MSDS Number: BLGVT
Responsible Party
SAN JOSE, CA 95133
US
Emergency Phone: 800-648-2661
Info Phone: 408-729-0291
Preparer: DEAN DARWIN
Cage: 0GUK5
Contractor
Telephone: 408-729-0291
Cage: 0GUK5
Ingredients
TRICHLOROFLUOROMETHANE (CFC-11) (SARA III)
CAS: 75-69-4
RTECS: PB6125000
OSHA PEL 1000 PPM
ACGIH TLV: C, 1000 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CHLORODIFLUOROMETHANE
CAS: 75-45-6
RTECS: PA6390000
OSHA PEL 1000 PPM
ACGIH TLV: 1000PPM; 9192
HUMANS ACUTELY OR CHRONICALLY EXPOSED TO
RTECS: 9999999ZZ
REACH OF CHILDREN. DO NOT SMOKE/USE FLAME WHILE
RTECS: 9999999ZZ
IN THE GENERAL VICINITY OF ARC WELDING, OPEN FLAMES
RTECS: 9999999ZZ
FORMATION OF HCL, FLUORIDES &/OR PHOSGENE .
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: TEMPORARY NERVS SYS DEPRESS W/
ANESTHETIC EFTS SUCH AS DIZZ/HDACH/NAUS. BRTHG EXTREMELY HIGH CONCS
OF THE VAPS MAY LEAD TO NARCOS, CARDIAC IRREGULARITIES, UNCON OR
DEATH. SKIN/EYE CONTACT: PRIM ARY IRRIT. PRLNG/RPTD CONT TO SKIN
MAY CAUSE DERMAT. EXERCISE DUE CARE. CHLOROFLUOROCARBONS (CFC) HAVE
PRDCED (SUPP DATA
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHAL: NAUSEA OR DIZZINESS MAY OCCUR FROM BRTHG
HIGH CONCENTRATIONS. SKIN/EYE CONTACT: MAY CAUSE BURNING SENSATION
&/ OR IRRITATION. SKIN ABSORPTION: MAY CAUSE BURNING SENSATION &/OR
IRRITATION. INGES T: NOT APPLICABLE.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHAL: REMOVE FROM EXPOS & RESTORE BRTHG. SEEK MED ATTN. DO
NOT ADMINISTER EPINEPHRINE. EYE: FLUSH IMMED W/WATER FOR A MINIMUM
OF 15 MIN & TAKE TO MD. SKIN: WASH AFFECTED AREA, TREAT FOR
FROSTBITE IF NECESSARY. CONSULT MD IF IRRIT PERSISTS. INGEST: NO
SPECIFIC INTERVENTION IS INDICATED AS THIS PROD IS NOT LIKELY TO BE
HAZ BY INGEST. DO NOT INDUCE VOMIT SO AS TO AVOID ASPIR OF MATL
INTO THE LUNGS.
Fire Fighting
Flash Point:NONE
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE STD FIREFIGHTING TECHNIQUES TO FIGHT FIRES
INVOLVING THIS MATL. THE MATL ITSELF IS NON-FLAMM. WATER SPRAY MAY
BE USED TO COOL AEROSOL CONTRS TO (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTRS MAY EXPLODE IF EXPOSED TO
EXTREME HEAT/FIRE. H.M.I.S. FIRE RATING: 1. THERMAL DECOMPOSITION
PRODUCTS MAY INCLUDE HCL, FLUORIDES & PHOSGENE (FP N
Accidental Release
Spill Release Procedures:VENTILATE THE AREA. DO NOT FLUSH INTO SEWERS.
COLLECT SPILL IN ABSORBENT MATERIAL AND TRANSFER TO STEEL DRUMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT STORE
OR USE NEAR HEAT, SPARKS, OR FLAMES.
Other Precautions:DO NOT BREATHE VAPORS. DO NOT GET IN EYES/SKIN. DO
NOT TAKE INTERNALLY. FOR PROFESSIONAL USE ONLY. TO BE USED ONLY BY
THOSE PERSONS WHO HAVE BEEN PROPERLY TRAINED TO USE THIS PROD &
INSTRUCTED IN ITS SAFE HNDLG. STORE OUT OF THE (ING 4)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING
APPARATUS IF WORKING IN AN AREA W/EXTREMELY HIGH VAPOR
CONCENTRATIONS.
Ventilation:LOCAL OR MECHANICAL TO KEEP BELOW THE STATED EXPOSURE
LIMITS.
Protective Gloves:BUTYL LINED ARE RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:USE IN WELL VENTILATED AREAS. USE GOOD LAB
PRACTICES WHEN DEALING W/THIS PRODUCT.
Supplemental Safety and Health
FIRE FIGHT PROC: PVNT EXCESSIVE PRESS BUILD UP. WEAR NIOSH/MSHA APPRVD
PRESS DEMAND SCBA & FULL PROT EQUIP . HLTH HAZ: SENSIT OF THE
MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & MAY HAVE A SIMILAR
EFFECT IN HUMANS. ADRENOMIMETICS (E.G., EPINEPHRINE) MAY BE
CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES IN (ING 3)
Chemical Properties
Boiling Pt:B.P. Text:-10F,-23C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.4
Evaporation Rate & Reference:FASTER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID WITH "SOLVENT" TYPE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID USING NEAR FLAMES OR ANY OTHER HIGH
INTENSITY SOURCE OF IGNITION.
Hazardous Decomposition Products:CO2, CO, HALOGENATED ACIDS, HCL,
FLUORIDES, AND PHOSGENE .
Disposal
Waste Disposal Methods:SPILLED MATERIAL COLLECTED IN ABSORBENT MATERIAL
SHOULD BE TRANSFERED TO STEEL DISPOSAL OR RECOVERY DRUMS. CONSULT
ALL LOCAL, STATE, AND FEDERAL REGULATIONS FOR PROPER DISPOSAL OR
RECOVERY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.